 |
Dongfeng 4x2 6000Liters 6 CBM Tanker Economical Vacuum Sewage Truck For Sludge Tanker
- Dongfeng 4X2 Duolika Truck Chassis. 6 Wheels / 6 Wheeler.
- YUCHAI Diesel Engine, 120hp, EURO-3.
- WLY Transmission, 5 forwards & 1 reverse. Manual Control.
- Sewage Tanker: 5000Liters or 6000Liters.
- Vacuum Pump: Chinese Famous WEILONG Brand, Or Italy Jurop Brand.
| Quantity: | |
|---|---|
-
WEIYU
Goods Description:
Our Sewage Suction Truck equips:
Special vacuum pump & PTO ( Power Take Off).
Transmission shaft.
High pressure sewage tank
Pipe network.
Sewage pipe for observing and cleanout equipment.
Time for full sucktion<5min
Our sewage suction truck includes:
1. Rotary vane pumps, vacuum pump.
2. Oil and gas separation device.
3. Hydrosphere separator.
4. Vacuum pressure gauge & pressure vessel.
5. Pipe system composition
6. Hand-washing facilities and visual dung tube
Our sewage suction truck's features:
1. It can suck full alarm device after full automatic alarm.
2. It prevent sewage spills of vacuum pump.
3. Tank material can be carbon steel or stainless steel.
4. Tank painting can be epoxy resin anticorrosive processing (rounded pot).
5. It may do anticorrosive processing, extracting partial chemical sewage and waste water.
Parameters of Dongfeng 4x2 6000Liters 6 CBM Tanker Economical Vacuum Sewage Truck For Sludge Tanker:
| Truck Specification | |||||
| Cab | Dongfeng single row cab, with power steering. Electronic flameout,without a/c | ||||
| Driving Type | 4*2 Left hand driving | ||||
| Max Speed (km/h) | 90 | ||||
| Overall dimension(mm) | 7250×2150×2850 | ||||
| GVW( kg) | 6000 | ||||
| Mass in working order ( kg) | 4200 | ||||
| Wheelbase(mm) | 3800 | ||||
| F/R track base (mm) | 1506/1466 | ||||
| F/R overhang (mm) | 1032/1663 | ||||
| Approach/Departure Angel | 19/14 | ||||
| Tire | 7.50R16 (6+1) | ||||
| Clutch | Single-plate dry diaphragm spring clutch | ||||
| Steering | Hydraulic steering with power assistance | ||||
| Gear box | 6-speed | ||||
| Bridge | Front axle | 2T | |||
| Rear axle | 4T | ||||
| Enging | Model | YC4F120-30 | |||
| Fuel Type | Diesel fuel | ||||
| Type | Water-cooled four-stroke,, direct injection, turbocharged | ||||
| Exhaust(ml) | 2659 | ||||
| Max output power/rotate speed (hp /rpm ) | 115/3200 | ||||
| Max torque/rotate speed(N.m/rpm) | 285/2200 | ||||
| Braking system | Service Brake | Compressed air brake | |||
| Park Brake | Spring energy | ||||
| Auxiliary brake | engine exhaust brake | ||||
| Eletric system | 24v | ||||
| Upper-Body specification | |||||
| Volume of tank | 6m³ | ||||
| Color | Painted in the corporation's colours with logo on both front doors as specified by the client | ||||
| Material of tanker | 5mm Carbon stell (Q235) | ||||
| Special function | Suction height | ≥9(m) | |||
| Suction time | 250(S) | ||||
| Maximum Inclination Angle | ≥45° | ||||
| maximum vacuum | ≥5MPa | ||||
| Lifting time | ≤45 S | ||||
| the Cover opening Angle | ≥75° | ||||
| The cover opening time | ≤25 S | ||||
| Suction pipe | 3m length and 100 mm in diameter | ||||
| Hose Racks | Fitted on both sides of tank, to accommodate a minimum of seven hoses each | ||||
| Fittings | Four-way change valve fitted to pump Drain separator vacuum pump Fully opening rear door Sight glasses at top and bottom of tank Ladder: For access to top of tank complete with cat walk on top of tank | ||||
| vacuum pump | pump type | SK-6 | |||
| motor power (kW) | 11 | ||||
| weight (Kg) | 460 | ||||
| pump speed (r.p.m) | 1440 | ||||
| suction pressure (MPa) | 5.4 | ||||
| diameter (mm) | 80 | ||||
| Brief introduction of function | It is formed of PTO, transmission shaft, vacuum pump, tanker, hydraulic system and pipe system. | ||||
Goods Description:
Our Sewage Suction Truck equips:
Special vacuum pump & PTO ( Power Take Off).
Transmission shaft.
High pressure sewage tank
Pipe network.
Sewage pipe for observing and cleanout equipment.
Time for full sucktion<5min
Our sewage suction truck includes:
1. Rotary vane pumps, vacuum pump.
2. Oil and gas separation device.
3. Hydrosphere separator.
4. Vacuum pressure gauge & pressure vessel.
5. Pipe system composition
6. Hand-washing facilities and visual dung tube
Our sewage suction truck's features:
1. It can suck full alarm device after full automatic alarm.
2. It prevent sewage spills of vacuum pump.
3. Tank material can be carbon steel or stainless steel.
4. Tank painting can be epoxy resin anticorrosive processing (rounded pot).
5. It may do anticorrosive processing, extracting partial chemical sewage and waste water.
Parameters of Dongfeng 4x2 6000Liters 6 CBM Tanker Economical Vacuum Sewage Truck For Sludge Tanker:
| Truck Specification | |||||
| Cab | Dongfeng single row cab, with power steering. Electronic flameout,without a/c | ||||
| Driving Type | 4*2 Left hand driving | ||||
| Max Speed (km/h) | 90 | ||||
| Overall dimension(mm) | 7250×2150×2850 | ||||
| GVW( kg) | 6000 | ||||
| Mass in working order ( kg) | 4200 | ||||
| Wheelbase(mm) | 3800 | ||||
| F/R track base (mm) | 1506/1466 | ||||
| F/R overhang (mm) | 1032/1663 | ||||
| Approach/Departure Angel | 19/14 | ||||
| Tire | 7.50R16 (6+1) | ||||
| Clutch | Single-plate dry diaphragm spring clutch | ||||
| Steering | Hydraulic steering with power assistance | ||||
| Gear box | 6-speed | ||||
| Bridge | Front axle | 2T | |||
| Rear axle | 4T | ||||
| Enging | Model | YC4F120-30 | |||
| Fuel Type | Diesel fuel | ||||
| Type | Water-cooled four-stroke,, direct injection, turbocharged | ||||
| Exhaust(ml) | 2659 | ||||
| Max output power/rotate speed (hp /rpm ) | 115/3200 | ||||
| Max torque/rotate speed(N.m/rpm) | 285/2200 | ||||
| Braking system | Service Brake | Compressed air brake | |||
| Park Brake | Spring energy | ||||
| Auxiliary brake | engine exhaust brake | ||||
| Eletric system | 24v | ||||
| Upper-Body specification | |||||
| Volume of tank | 6m³ | ||||
| Color | Painted in the corporation's colours with logo on both front doors as specified by the client | ||||
| Material of tanker | 5mm Carbon stell (Q235) | ||||
| Special function | Suction height | ≥9(m) | |||
| Suction time | 250(S) | ||||
| Maximum Inclination Angle | ≥45° | ||||
| maximum vacuum | ≥5MPa | ||||
| Lifting time | ≤45 S | ||||
| the Cover opening Angle | ≥75° | ||||
| The cover opening time | ≤25 S | ||||
| Suction pipe | 3m length and 100 mm in diameter | ||||
| Hose Racks | Fitted on both sides of tank, to accommodate a minimum of seven hoses each | ||||
| Fittings | Four-way change valve fitted to pump Drain separator vacuum pump Fully opening rear door Sight glasses at top and bottom of tank Ladder: For access to top of tank complete with cat walk on top of tank | ||||
| vacuum pump | pump type | SK-6 | |||
| motor power (kW) | 11 | ||||
| weight (Kg) | 460 | ||||
| pump speed (r.p.m) | 1440 | ||||
| suction pressure (MPa) | 5.4 | ||||
| diameter (mm) | 80 | ||||
| Brief introduction of function | It is formed of PTO, transmission shaft, vacuum pump, tanker, hydraulic system and pipe system. | ||||
