Availability: | |
---|---|
Quantity: | |
WY5071XCC4
WEIYU
The dust collection vacuum street truck adopts pure suction air dry operation,which is specially produced for urban sanitation, coal washing plants, cement plants and other special environments. The first choice for road cleaning and cleaning in sanitation, coal mine and cement plants and other industries.
The central vacuum panel can effectively remove dust from dozens of microns to ore powder, large particles, stones, bricks, and leaves. The diameter of the auxiliary suction pipe can reach 10 meters, which can be used in green belts and other artificial In the dead corner area that cannot be entered, and there is no primary or secondary dust problem during the cleaning process, and the cleaning rate is as high as 99%.
Feature of Mechannial Commercial Street Sweeper Truck
Central suction panel;
Schneider control switch;
JMC auxiliary engine;
Heprius solenoid valve group;
CVT automatic clutch;
Maintenance-free centrifugal fan;
High-precision dustbin filter system (up to 0.3 microns) ;
imported pulse valve;
Tail LED Arrow light;
Manual pump emergency system;
Rear mist spray water wetting function;
Simple structure: no hydraulic motor rotating mechanism, no adjusting mechanism such as sweeping brush and rolling brush.
Convenient operation: You only need to use the control panel in the cab to easily operate the auxiliary engine start and stop, fan speed up and down, vacuum port up and down, rear door switch, box lift, sprinkler switch, and install working video probes.
Low cost of use: there is no frequent replacement of brushes, only a small number of rubber wearing parts.
Annual maintenance costs are low. Compared with manual cleaning, it can save 240,000(40,000 USD) yuan per year; Compared with traditional road sweepers, it saves 120,000 yuan(20,000 USD) per year.
Good dust removal effect: The separation of particles and dust can be achieved through multiple stages such as gravity dust fall and inertial dust removal, which can truly be absorbed and retained). A water spray device is installed, and the filter system eliminates secondary dust.
Improve cleaning efficiency and reduce cleaning costs
Spec. of FOTON AUMARK Dust Collection Vacuum Sweeper Truck
Cabin | Driving type 4x2,LHD or RHD | ||||
single row,with two seats,audio with USB, | |||||
Vehicle Main Dimensions | Overall dimensions (L x W x H)mm | 5950×1990×2500 | |||
Wheel base (mm) | 3300 | ||||
Wheel track (front/rear) (mm) | 1506/1530 | ||||
Approach/Departure angle(°) | 24/13 | ||||
Weight in KGS | Tare Weight | 4950 | |||
payload | 2270 | ||||
Front axles loading capacity | 1x2200 | ||||
Rear axles loading capacity | 1x5000 | ||||
Max. driving speed(km/h) | 90 | ||||
Engine | Brand | Aoling | |||
Model | 4J28TC | ||||
Horse Power(HP) | 110HP | ||||
Emission standard | Euro IV | ||||
Gearbox | 6T110,6 forwards & 1 reverse | ||||
Steering | Left hand drive | ||||
Tire | 7.00R16,6 tires with one spare | ||||
Dumping angle | ≥45° | ||||
Hopper | 4000liters,double layer,Stainless steel inside | ||||
Water tank | 1000Liters | ||||
Auxiliary Engine | Model | JMC JX493G3 | |||
Aerator | Type | 6.0A,High pressure centrifugal Aerator | |||
Continuously variable automatic clutch | It can effectively realize the automatic combination and separation between the engine and the fan, reduce the inertia buffer force between the fan and the engine, and make the auxiliary engine and the fan more durable. | ||||
Water pump | NORTH STAR 24V-2271T | ||||
Hypris Solenoid Control Valve | HIP7-24V | ||||
Hydraulic Oil Cylinder | 2 Nos,840L | ||||
Electromagnetic pulse valve | 4 pcs | ||||
Dust filter cartridge | 8 pcs | ||||
Suction Nozzle | Type | U-shaped | |||
Nozzle diameter | 200mm | ||||
Nozzle ground clearance when operation | 5-10mm |
The dust collection vacuum street truck adopts pure suction air dry operation,which is specially produced for urban sanitation, coal washing plants, cement plants and other special environments. The first choice for road cleaning and cleaning in sanitation, coal mine and cement plants and other industries.
The central vacuum panel can effectively remove dust from dozens of microns to ore powder, large particles, stones, bricks, and leaves. The diameter of the auxiliary suction pipe can reach 10 meters, which can be used in green belts and other artificial In the dead corner area that cannot be entered, and there is no primary or secondary dust problem during the cleaning process, and the cleaning rate is as high as 99%.
Feature of Mechannial Commercial Street Sweeper Truck
Central suction panel;
Schneider control switch;
JMC auxiliary engine;
Heprius solenoid valve group;
CVT automatic clutch;
Maintenance-free centrifugal fan;
High-precision dustbin filter system (up to 0.3 microns) ;
imported pulse valve;
Tail LED Arrow light;
Manual pump emergency system;
Rear mist spray water wetting function;
Simple structure: no hydraulic motor rotating mechanism, no adjusting mechanism such as sweeping brush and rolling brush.
Convenient operation: You only need to use the control panel in the cab to easily operate the auxiliary engine start and stop, fan speed up and down, vacuum port up and down, rear door switch, box lift, sprinkler switch, and install working video probes.
Low cost of use: there is no frequent replacement of brushes, only a small number of rubber wearing parts.
Annual maintenance costs are low. Compared with manual cleaning, it can save 240,000(40,000 USD) yuan per year; Compared with traditional road sweepers, it saves 120,000 yuan(20,000 USD) per year.
Good dust removal effect: The separation of particles and dust can be achieved through multiple stages such as gravity dust fall and inertial dust removal, which can truly be absorbed and retained). A water spray device is installed, and the filter system eliminates secondary dust.
Improve cleaning efficiency and reduce cleaning costs
Spec. of FOTON AUMARK Dust Collection Vacuum Sweeper Truck
Cabin | Driving type 4x2,LHD or RHD | ||||
single row,with two seats,audio with USB, | |||||
Vehicle Main Dimensions | Overall dimensions (L x W x H)mm | 5950×1990×2500 | |||
Wheel base (mm) | 3300 | ||||
Wheel track (front/rear) (mm) | 1506/1530 | ||||
Approach/Departure angle(°) | 24/13 | ||||
Weight in KGS | Tare Weight | 4950 | |||
payload | 2270 | ||||
Front axles loading capacity | 1x2200 | ||||
Rear axles loading capacity | 1x5000 | ||||
Max. driving speed(km/h) | 90 | ||||
Engine | Brand | Aoling | |||
Model | 4J28TC | ||||
Horse Power(HP) | 110HP | ||||
Emission standard | Euro IV | ||||
Gearbox | 6T110,6 forwards & 1 reverse | ||||
Steering | Left hand drive | ||||
Tire | 7.00R16,6 tires with one spare | ||||
Dumping angle | ≥45° | ||||
Hopper | 4000liters,double layer,Stainless steel inside | ||||
Water tank | 1000Liters | ||||
Auxiliary Engine | Model | JMC JX493G3 | |||
Aerator | Type | 6.0A,High pressure centrifugal Aerator | |||
Continuously variable automatic clutch | It can effectively realize the automatic combination and separation between the engine and the fan, reduce the inertia buffer force between the fan and the engine, and make the auxiliary engine and the fan more durable. | ||||
Water pump | NORTH STAR 24V-2271T | ||||
Hypris Solenoid Control Valve | HIP7-24V | ||||
Hydraulic Oil Cylinder | 2 Nos,840L | ||||
Electromagnetic pulse valve | 4 pcs | ||||
Dust filter cartridge | 8 pcs | ||||
Suction Nozzle | Type | U-shaped | |||
Nozzle diameter | 200mm | ||||
Nozzle ground clearance when operation | 5-10mm |