Operating Procedures of Road Sweeper Truck

Road Sweeper Truck is widely used on the main highway, municipal and airport pavement, urban residential areas, parks, and other road cleaning. So, what is the Road Sweeper Truck operating procedure? Let's take a look at it next.

Here is the content list:

• Cleaning work

• Cleaning is over

• Unload garbage

Cleaning work

Turn on the power of the control box, point the Road Washing Sweeper Truck control valve to the auxiliary valve position, start the auxiliary engine, point the auxiliary engine clutch control button to the closed position, the fan starts to work, point the Street cleaning Truck vacuum box control button to the down position, point the left-sweep disc or right-sweep disc control knob to the down position, point the left-sweep rotation or right-sweep rotation control knob to the forward rotation position (clockwise for the left disc, counterclockwise for the right disc), turn the left water spray, right water spray, the rear water spray control button points to the open position, the water pump control button points to the open position, and the Street cleaning Truck drives at an appropriate speed to start the cleaning action.

Cleaning is over

Stop the Street Sweeper Truck, point the water pump control button, left water spray control button, right water spray control button, and rear water spray control button to the OFF position, point the broom control button to the middle position, and point the sweeper control button to the up position. And then point to the middle position, point the vacuum box control button to the up, then point to the middle position, point the auxiliary engine clutch control button to the minute position, and then point to the middle position, point the control valve control button to the middle position, turn off the Road Washing Sweeper Truck engine and turn off the power to the control box.

Unload garbage

Turn on the power of the control box, point the control knob of the control valve to the position of the main valve, start the main engine of the Street Sweeper Truck, depress the vehicle clutch, turn on the clutch switch of the oil pump attached to the vehicle (pull it outwards), at the proper speed Release the vehicle clutch, point the rear door control button on the control box to the open position, and then point to the middle position after 5 seconds, point the carriage control button to the up position, and point the control button to the middle position at any time according to the inclination angle of the carriage. The Street cleaning Truck carriage is tilted up and stopped, and the garbage is cleaned. After the garbage is cleaned, point the control button of the carriage to the lower position. After the carriage is fully returned, point the control button to the middle position, and point the back door control key to the closed position. After 10 seconds Then point to the middle position, after cleaning the garbage, depress the vehicle clutch, turn off the additional oil pump clutch control button (push it inward), release the Road Sweeper Truck clutch at an appropriate speed, point the control valve of the control box to the middle position, and turn off the control box power supply.

If you are interested in Road Sweeper Truck, please contact us at www.garbagetruckvehicle.com. I look forward to your arrival very much and hope to cooperate with you.