Sewage Suction Truck Maintenance

Sewage Suction Truck is a new type of sanitation vehicle that collects, transfers, and cleans up, transports sludge and sewage, and avoids secondary pollution. Liquid substances such as crude oil. What are the Sewage Suction Truck maintenance items?

Here is the content list:

• Reasonably determine the maintenance cycle

• Take advantage of free testing

• Minimize disassembly of maintenance assemblies

• Use proper oil

• Water separator

• Sewage Suction Truck anti-overflow valve

• Rear tank door of Sewage Suction Truck

Reasonably determine the maintenance cycle

Scientifically determining the interval mileage of various maintenance operations can not only keep the Sewage Suction Truck in good technical condition but also save some unnecessary troubles. Generally speaking, a new car with good technical condition can be used under good operating conditions, and the maintenance period can be appropriately extended; while the technical condition of the vehicle is poor, or the operating conditions are poor, the maintenance period should be appropriately shortened.

Take advantage of free testing

Sewage Suction Truck owners can use these free inspection activities to conduct a comprehensive physical examination of their cars, find out some potential faults in time, and eliminate these hidden faults, saving unnecessary hidden faults in the future.

Minimize disassembly of maintenance assemblies

To prevent the vehicle from entering the maintenance period prematurely, you'd better disassemble the maintenance assembly as little as possible, and use various advanced maintenance equipment and means to perform disassembly-free maintenance on the Sewage Cleaning Truck, which can not only avoid the disassembly and maintenance of the vehicle assembly and unnecessary damage to components can also greatly speed up vehicle maintenance, thereby reducing maintenance time.

Use proper oil

The proper use of oil includes two aspects: one is fuel oil, and the other is lubricating oil. Improper selection of fuel can easily cause failures such as clogging of the fuel filter, resulting in unstable idling, poor acceleration, and increased fuel consumption. It will also accelerate the wear of the cylinder and affect the life of the Vacuum sewage truck engine. How should we choose lubricating oil, to meet the lubrication requirements and improve the working efficiency of the engine? The basic principle is: it is enough to meet the requirements of Vacuum sewage truck use, and only good fuel and lubricating oil are selected.

Water separator

The hydraulic oil separated by the oil-water separator of the Vacuum sewage truck is used as the lubricating oil for the vacuum pump of the Sewer Dredging truck but the separated water will be stored at the bottom of the tank, so the Sewage Suction Truck must be drained after the work is completed. If the drainage is forgotten, it will be sucked into the pump. Causes problems such as sintering and the hydraulic oil are used for too long, which will reduce the smoothness and airtightness. Therefore, the Sewage Suction Truck should replace the hydraulic oil on time.

Sewage Suction Truck anti-overflow valve

The sludge suction truck anti-overflow valve is installed to prevent the sewage from overflowing into the vacuum pump of the Sewer Dredging truck when the tank is full. The vacuum pump of the Sewage Suction Truck sucks more sludge, which is easy to damage the vacuum pump. Therefore, when the Sewage Suction Truck is working, it is necessary to check the quality of the anti-overflow valve frequently.

Rear tank door of Sewage Suction Truck

After the tank door is clamped and installed at the rear of the sludge suction truck for a long time, dirt will occur inside, and the handwheel should not be tightened. Therefore, the interior should be divided and cleaned every 6 months, and the lubricating grease should be properly supplemented at this time. After the Sewage Suction Truck works, it is best to clean the sealing rubber ring of the rear tank door. If there is leakage, if there is no problem with checking the tightening device, it is necessary to replace the sealing rubber ring of the rear tank door of the fecal suction truck, and the rear tank door of the Sewage Suction Truck is sealed. If the rubber ring is used for a long time, the sealing performance may decrease.

The above is related to the maintenance of the Sewage Suction Truck. If you are interested in Sewage Suction Truck, please contact us. Our website is www.garbagetruckvehicle.com. I look forward to your arrival very much and hope to cooperate with you.